Yamaha RX-A1010 User Manual

En 90
You can configure the playback-related settings in accordance with a playback source.
Since this menu is operational on the front panel (or on the TV screen), you can easily
configure the settings during playback.
1
Press OPTION.
Front display
TV screen
2
Use the cursor keys to select an item and press ENTER.
• To return to the previous screen during menu operations, press RETURN.
3
Use the cursor keys ( / ) to select a setting and press ENTER.
4
To exit from the menu, press OPTION.
Option menu items
• Available items vary depending on the selected input source.
• Texts in parentheses denote indications on the front display.
Configuring settings in accordance with a playback source (Option menu)
OUT 1 IN OUT 2
VOLU ME MUTE
DRCADAPTIVE
3
ZONE
2
SBLPL SBRSBPR
SW1 SL SW2SW SR
PL
CL R PR
SLEEP
HD
PRE AMP PAR TY
ZONE
3
ZONE
4
HD
TAG
DOCK
ToneControl
Option
Item Function Page
Tone Control
(Tone Control)
Adjusts the high-frequency range and low-frequency range
of sounds.
91
Adaptive DRC
(Adaptive DRC)
Sets whether dynamic range (from maximum to minimum)
is adjusted automatically in conjunction with adjusting the
volume level.
91
CINEMA DSP 3D Mode
(CINEMA DSP 3D)
Enables/disables CINEMA DSP 3D. 91
Dialogue Lift
(Dialog Lift)
Adjusts the vertical position of center sound when front
presence speakers are used.
91
Extended Surround
(EXTD Surround)
Selects the 5.1 to 7.1-channel signal playback method
when surround back speakers are used.
92
Volume Trim
(Volume Trim)
Corrects volume differences between input sources. 92
Enhancer
(Enhancer)
Enables/disables Compressed Music Enhancer. 92
Audio Select
(Audio Select)
Selects the audio input jack to use when more than one
audio connection is made for one input source.
92
Shuffle
(Shuffle)
Configures the shuffle setting for the iPod (p.70), USB
storage device (p.75) or PC (p.78).
—
Repeat
(Repeat)
Configures the repeat setting for the iPod (p.70), USB
storage device (p.75) or PC (p.78).
—
Connect/Disconnect
(Connect/Disconnect)
Establishes/terminates a wireless connection between your
Bluetooth component and the Bluetooth receiver.
72
Pairing
(Pairing)
Performs pairing of your Bluetooth component and the
Bluetooth receiver.
71

Yamaha RX-A1010 Specifications

General

RMS rated power	1190 W
Audio output channels	7.2 channels
Dynamic power per channel (8 Ohm)	135 W
Power output per channel (1KHz@8 Ohm)	165 W
Power output per channel (20-20KHz@8 Ohm)	110 W
HDMI in	8
Composite video in	5
Digital audio coaxial in	3
Component video (YPbPr/YCbCr) in	4
Number of HDMI outputs	2
Component video (YPbPr/YCbCr) out	1
Speakers connectivity type	-
Ethernet LAN	No
Supported radio bands	AM, FM
Product color	Titanium
Audio decoders	Dolby Digital Plus, Dolby Pro Logic IIx, Dolby TrueHD, DTS-HD Master Audio
Apple docking compatibility	Not supported
Power consumption (standby)	0.3 W

Weight and Dimensions

Depth	432 mm
Width	435 mm
Height	182 mm
Weight	15100 g