En 15
Basic speaker configuration
■ Placing speakers in your room
Depending on the number of speakers, place the speakers and subwoofer (with built-in amplifier) in your room. This section describes the representative speaker layout examples.
❑ 7.1+2 channel system
This speaker system brings out the full performance of this unit and allows you to enjoy
a natural stereoscopic sound field with any contents.
• The surround back speakers and front presence speakers do not produce sounds simultaneously. This unit
automatically switches the speakers to be used depending on a selected CINEMA DSP (p.51).
❑ 7.1 channel system (using front presence speakers)
This speaker system uses the front presence speakers to produce a highly-natural
stereoscopic sound field, and is suited for enjoying 5.1-channel contents.
❑ 7.1 channel system (using surround back speakers)
This speaker system creates Virtual Presence Speaker (VPS) using the front, center and
surround speakers to produce a stereoscopic sound field, and also allows you to enjoy
extended surround sounds using the surround back speakers.
1
Speaker connections
2 3 4 5 6 7 8
To Next Page
Loading...
Need help?
General
Weight and Dimensions
