Yamaha RX-A1010 User Manual

En 76
You can play back music files stored on your PC or DLNA-
compatible NAS on this unit.
• To use this function, this unit and your PC must be connected to the network
properly (p.36). You can check whether the network parameters (IP address, etc.)
are properly assigned to this unit in “Network” (p.117) in the “Information”.
• This unit supports playback of WAV (PCM format only), MP3, WMA, MPEG-4 AAC
and FLAC files.
• This unit is compatible with sampling frequency of up to 96 kHz for WAV and
FLAC files, and 48 kHz for other files.
• To play back FLAC files, you need to install server software that supports sharing
of FLAC files via DLNA on your PC or use a NAS that supports FLAC files.
Requirements
This unit can play back music files stored on the following music
servers.
- PC with Windows Media Player 11 or later installed
- PC with DLNA/UPnP certificate server software installed
- NAS with DLNA/UPnP certification
Media sharing setup
To play back music files stored on your PC or DLNA-compatible
NAS, first you need to configure the media sharing setting on each
music server.
■ For a PC with Windows Media Player
installed
1
Check that Windows Media Player 11 or later is
installed on your PC.
2
In the media sharing settings, enable the media
sharing and select this unit as a device to which the
media is shared.
■ For a NAS or a PC with other DLNA sever
software installed
Refer to the instruction manual of the device or software and
configure the media sharing setting.
Playback of PC music contents
Follow the procedure below to operate the PC music contents and
start playback.
1
Press NET repeatedly to select “PC” as the input
source.
The browse screen is displayed on the TV.
• If playback of a music file selected from this unit is ongoing on your PC, the
playback screen is displayed. This function works only when “DMC Control”
(p.95) in the “Input” menu is set to “Disable”.
2
Use the cursor keys to select a music server and
press ENTER.
3
Use the cursor keys to select an item and press
ENTER.
If a song is selected, playback starts and the playback
screen is displayed.
Playing back music stored on PCs
SCENE
RETURN
VOLUME
SUR. DECODE
STRAIGHT
ENHANCERSLEEP PURE DIRECT
AV
AUDIO
123
67
4
V-A UX 5
FM
INFO MEMORY
AM
PRESET
PA RT Y
MOVIE MUSIC
1 234
TV CD RADIO
MUTE
ENTER
CATEGORY
7856
90
10
1234
MODE
HOLD TAG
PRG SELECT
ENT
HDMI OUT
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
MAIN ZONE 2
RECEIVER
CODE SET
INPUT
MUTE
DOCK
PHONO
OPTIONON SCREEN
1234
MULTI
TUNER
TUN./CH
NET USBSIRIUS
BD/DVD
SC
EN
E
VO
LUME
S
UR
.
DE
CO
DE
S
TRAI
G
HT
ENHANCER
S
LE
E
PP
ENHANCER
U
RE DIRE
C
T
A
V
A
U
D
I
O
2
1
3
7
6
4
V
-
AU
X
5
FM
I
NF
O
MEM
O
RY
A
M
PRE
S
ET
M
O
VI
E
M
US
I
C
1
2
3
4
TV
CD
RADI
O
MUTE
CA
TEGOR
A
A
Y
7
8
5
6
9
0
10
1
2
3
4
MO
DE
EN
T
T
O
P
MENU
P
O
P-
UP
M
EN
U
DISPLA
Y
A
A
SO
UR
CE
M
AI
N
Z
O
NE 2
R
E
C
EIVER
CO
DE
SE
T
INP
U
T
M
U
T
E
DOC
K
P
H
O
N
O
O
PTI
ON
O
N
SC
REE
N
2
1 43
MU
LT
I
T
U
NE
R
T
UN.
/C
H
USB
S
IRI
US
BD
/
DV
D
ENTER
NET
Cursor keys

Yamaha RX-A1010 Specifications

General

RMS rated power	1190 W
Audio output channels	7.2 channels
Dynamic power per channel (8 Ohm)	135 W
Power output per channel (1KHz@8 Ohm)	165 W
Power output per channel (20-20KHz@8 Ohm)	110 W
HDMI in	8
Composite video in	5
Digital audio coaxial in	3
Component video (YPbPr/YCbCr) in	4
Number of HDMI outputs	2
Component video (YPbPr/YCbCr) out	1
Speakers connectivity type	-
Ethernet LAN	No
Supported radio bands	AM, FM
Product color	Titanium
Audio decoders	Dolby Digital Plus, Dolby Pro Logic IIx, Dolby TrueHD, DTS-HD Master Audio
Apple docking compatibility	Not supported
Power consumption (standby)	0.3 W

Weight and Dimensions

Depth	432 mm
Width	435 mm
Height	182 mm
Weight	15100 g