Yamaha RX-A1010 User Manual

En 142
❑ Audio Section
• Rated Output Power
(20 Hz to 20 kHz, 0.06% THD, 8Ω)
Front L/R .............................................................110 W+110 W
Center............................................................................. 110 W
Surround L/R.......................................................110 W+110 W
Surround Back L/R .............................................110 W+110 W
(1 kHz, 0.9% THD, 8Ω)
Front L/R .......................................... 135 W/ch (120 W+120 W)
Center...........................................................135 W/ch (120 W)
Surround L/R.................................... 135 W/ch (120 W+120 W)
Surround Back L/R .......................... 135 W/ch (120 W+120 W)
(1 kHz, 0.9% THD, 4Ω) [U.K. and Europe models]
Front L/R .................................................................... 170 W/ch
• Maximum Effective Output Power (JEITA, 1 kHz, 10% THD, 8 Ω )
[China, Korea, Asia and General models]
Front L/R .................................................................... 165 W/ch
Center ........................................................................ 165 W/ch
Surround L/R.............................................................. 165 W/ch
Surround Back L/R .................................................... 165 W/ch
• Dynamic Power (IHF)
Front L/R (8/6/4/2 Ω).................................. 135/165/210/280 W
• Damping Factor
Front L/R, 1 kHz, 8 Ω ............................................. 150 or more
• Input Sensitivity / Input Impedance
PHONO (1 kHz, 100 W/8 Ω) ................................3.5 mV/47 kΩ
AUDIO2 etc. (1 kHz, 100 W/8 Ω)........................200 mV/47 kΩ
• Maximum Input Signal
PHONO (1 kHz, 0.5% THD)............................... 60 mV or more
AUDIO2 etc. (1 kHz, 0.5% THD) ......................... 2.4 V or more
• Output Level / Output Impedance
AV OUT ..............................................................200 mV/1.2 kΩ
HEADPHONE OUT .............................................150 mV/100 Ω
PRE OUT
SUBWOOFER (50 Hz) ...........................................1.0 V/1.2 kΩ
Except SUBWOOFER (1 kHz) ...............................1.0 V/1.2 kΩ
ZONE OUT.............................................................1.0 V/1.2 kΩ
• Frequency Response
AUDIO2 etc. to Front (Pure Direct, 10 kHz to 100 kHz)
....................................................................................+0/-3 dB
• RIAA Equalization Deviation
PHONO (20 Hz to 20 kHz) .........................................0±0.5 dB
• Total Harmonic Distortion
PHONO to AV OUT.............................................. 0.02% or less
MULTI CH INPUT to SP OUT (Pure Direct, 70W, 8Ω)
............................................................................ 0.04% or less
• Signal to Noise Ratio (IHF-A Network)
PHONO to AV OUT (Input shorted 5 mV)
[U.S.A., Canada, China and General models]...86 dB or more
[Other models] ...................................................81 dB or more
AUDIO2 etc. to SP OUT (Pure Direct, Input shorted 250 mV)
.........................................................................100 dB or more
• Residual Noise (IHF-A Network)
Front L/R (SP OUT)............................................. 150 µV or less
• Channel Separation
PHONO (Input Shorted, 1 kHz/10 kHz)... 60 dB/55 dB or more
AUDIO2 etc.
(Input 5.1 kΩ Shorted, 1 kHz/10 kHz) ..... 60 dB/45 dB or more
• Volume Control
Main Zone ................. MUTE, -80 dB to +16.5dB (0.5 dB step)
Zone2 ........................ MUTE, -80 dB to +16.5dB (0.5 dB step)
• Tone Control Characteristics (Front L/R)
Main Zone
Bass Boost/Cut......................... ±6.0 dB/50 Hz (0.5 dB step)
Bass Turnover............................................................. 350 Hz
Treble Boost/Cut ......................±6.0 dB/20 kHz (0.5 dB step)
Treble Turnover...........................................................3.5 kHz
Zone2
Bass Boost/Cut............................. ±10 dB/50 Hz (2 dB step)
Bass Turnover............................................................. 350 Hz
Treble Boost/Cut ........................... ±10 dB/50 Hz (2 dB step)
Treble Turnover...........................................................3.5 kHz
• Filter Characteristics
(fc=40/60/80/90/100/110/120/160/200 Hz)
H.P.F. (Front, Center, Surround, Surround Back: Small)
................................................................................. 12 dB/oct.
L.P.F. (Subwoofer)..................................................... 24 dB/oct.
❑ Video Section
• Video Signal Type
[U.S.A., Canada, Korea and General models] ................NTSC
[Other models] .................................................................... PAL
• Video Signal Type (Video Conversion)..................... NTSC/PAL
• Video Signal Level
Composite..............................................................1 Vp-p/75 Ω
S-Video
Y ..........................................................................1 Vp-p/75 Ω
C (NTSC) [U.S.A., Canada, Korea and General models]
.....................................................................0.286 Vp-p/75 Ω
C (PAL) [Other models]....................................0.3 Vp-p/75 Ω
Component
Y ..........................................................................1 Vp-p/75 Ω
Pb/Pr ................................................................0.7 Vp-p/75 Ω
• Video Maximum Input Level (Video Conversion Off)
....................................................................... 1.5 Vp-p or more
• Signal to Noise Ratio (Video Conversion Off) .... 60 dB or more
• Monitor Out Frequency Response (Video Conversion Off)
Component (MONITOR OUT/ZONE OUT)
........................................................... 5 Hz to 100 MHz, ±3 dB
❑ FM Section
• Tuning Range
[U.S.A. and Canada models].............. 87.5 MHz to 107.9 MHz
[Asia and General models]
...................................... 87.5/87.50 MHz to 108.0/108.00 MHz
[Other models] ................................ 87.50 MHz to 108.00 MHz
• 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.)
Mono ................................................................. 3 µV (20.8 dBf)
• Signal to Noise Ratio (IHF)
Mono/Stereo [except U.S.A. model] .....................72 dB/70 dB
HD [U.S.A. model] ...........................................................80 dB
• Harmonic Distortion (IHF, 1 kHz)
Mono/Stereo [except U.S.A. model] ........................0.3%/0.5%
HD [U.S.A. model] .......................................................... 0.03%
• Antenna Input................................................ 75 Ω unbalanced

Yamaha RX-A1010 Specifications

General

RMS rated power	1190 W
Audio output channels	7.2 channels
Dynamic power per channel (8 Ohm)	135 W
Power output per channel (1KHz@8 Ohm)	165 W
Power output per channel (20-20KHz@8 Ohm)	110 W
HDMI in	8
Composite video in	5
Digital audio coaxial in	3
Component video (YPbPr/YCbCr) in	4
Number of HDMI outputs	2
Component video (YPbPr/YCbCr) out	1
Speakers connectivity type	-
Ethernet LAN	No
Supported radio bands	AM, FM
Product color	Titanium
Audio decoders	Dolby Digital Plus, Dolby Pro Logic IIx, Dolby TrueHD, DTS-HD Master Audio
Apple docking compatibility	Not supported
Power consumption (standby)	0.3 W

Weight and Dimensions

Depth	432 mm
Width	435 mm
Height	182 mm
Weight	15100 g