9-7
E
TRBL
ANLS
Self-diagnosis
With the engine running, press the 2 buttons
1 simultaneously for 8 seconds and check if a
diagnostic code is indicated on the multifunc-
tion meter.
If the YDIS is not used to check the symptoms
listed in the “Diagnostic code table,” the diag-
nostic codes can be checked easily with the
self-diagnosis in the multifunction meter. How-
ever, because the multifunction meter cannot
display more than 1 diagnostic code even if
there are multiple diagnostic codes, using the
YDIS is recommended.
1
Engine unit trouble analysis
To Next Page
Loading...
Need help?
General