2 DISASSEMBLY OF COMPONENTS 2 DISASSEMBLY OF COMPONENTS
EF494T TM 06/2011 edition
(7) Remove the right step stays (A) and (B), and
remove the left and right brake rods (C).
(G) Separation position
IMPORTANT
The brake pedal return springs (D) must be
installed in the correct directions.
Note:
Remember the position of the parking brake (E).
(8) Remove the fuel pipe at section A, and
remove the 4 pipe clips (B).
(9) Remove the coupler to the PTO neutral
switch on the rear end of the transmission.
IMPORTANT
Remember the route the harness follows.
To Next Page
Loading...
