Item Specification
Three-Phase Drive Model
2A0001 2A0002 2A0004 2A0006 2A0008 2A0010 2A0012 2A0018 2A0020
Single-Phase Drive Model
<1>
BA0001 BA0002 BA0003 BA0006 - BA0010 - - -
Harmonic
Corrective
Actions
DC Reactor Optional
<1> Drives with a single-phase power supply input will output three-phase power and cannot run a single-phase
motor.
<2> The motor capacity (kW) refers to a Yaskawa 4-pole motor. The rated output current of the drive output amps
should be equal to or greater than the motor rated current.
<3> Input current rating varies depending on the power supply transformer, input reactor, wiring connections, and
power supply impedance.
<4> Rated motor capacity is calculated with a rated output voltage of 220 V.
<5> Carrier frequency is set to 2 kHz (Swing PWM). Current derating is required in order to raise the carrier
frequency.
<6> Carrier frequency is set to 10 kHz. Current derating is required to raise the carrier frequency.
<7> Carrier frequency is set to 8 kHz. Current derating is required to raise the carrier frequency.
<8>
DC is not available for UL standards.
Note: Differences between Heavy Duty (HD) ratings and Normal Duty (ND) ratings for the drive include rated
input and output current, overload capacity, carrier frequency and current limit. Set parameter C6-01 to
“0” for HD or “1” for ND (default).
A.2 Single/Three-Phase 200 V Class Drive
212
YASKAWA ELECTRIC TOEP C710606 25D YASKAWA AC Drive J1000 Installation & Start-Up Manual
To Next Page
Loading...
