YASKAWA L1000A - Page 125

4 Start-Up Programming & Operation
YASKAWA ELECTRIC TOEP C710616 38H YASKAWA AC Drive-L1000A Quick Start Guide 123
Start-Up Programming & Operation
4
3. Use a pair of diagonal cutters to cut an opening in the connector cover that allows the cable to pass through. The
cable should pass through the connector cover with the cover fastened to the drive.
Figure 54
Figure 61 Reattaching the Connector Cover (1)
4. Slide the connector cover back into place as shown in Figure 62.
NOTICE: Make sure the cable does not get pinched between the drive and the connector cover, as this could damage the cable.
Figure 55
Figure 62 Reattaching the Connector Cover (2)
Figure 56
Figure 63 Drive and Battery Connection Complete
Cut an opening to allow the
battery cable to pass through.
Connect
to battery.
TOEP_C710616_38H_7_0.book 123 ページ ２０１５年１１月１１日 水曜日 午後７時４０分