YASKAWA L1000A - Page 126

4 Start-Up Programming & Operation
124 YASKAWA ELECTRIC TOEP C710616 38H YASKAWA AC Drive-L1000A Quick Start Guide
Models CIMR-LU20085 to 20415, CIMR-LU40045 to 40370, 50003 to 50200, and 50032 to 50200
1. Use a Phillips screwdriver to loosen the screw holding the CN19 connector cover in place.
Figure 57
Figure 64 Removing the CN19 Connector Cover
2. Slide the CN19 connector cover from the drive as shown in Figure 65.
Figure 58
Figure 65 Sliding the CN19 Connector Cover
3. Insert a straight-edge screwdriver into the opening as shown in Figure 66, then remove the CN19 connector
cover by sliding it as shown in Figure 66.
Figure 59
Figure 66 Removing the CN19 Connector Cover
Screw
Connector
cover
Phillips screwdriver
TOEP_C710616_38H_7_0.book 124 ページ ２０１５年１１月１１日 水曜日 午後７時４０分