YASKAWA L1000A - Page 127

4 Start-Up Programming & Operation
YASKAWA ELECTRIC TOEP C710616 38H YASKAWA AC Drive-L1000A Quick Start Guide 125
Start-Up Programming & Operation
4
4. Connect the cable to the CN19 connector port on the drive.
Note: The connector port location and angle vary by drive model.
NOTICE: Be sure that the connector fastens at the correct angle to the CN19 connector port. The incorrect angle could damage the
battery, cable, or connector.
Figure 60
Figure 67 Connecting the Cable
5. The cable should pass through the connector cover with the cover fastened to the drive.
Figure 61
Figure 68 Reattaching the CN19 Connector Cover
6. Slide the CN19 connector cover back into place as shown in Figure 69.
NOTICE: Make sure the cable does not get pinched between the drive and the CN19 connector cover, as this could damage the cable.
Figure 62
Figure 69 Sliding the CN19 Connector Cover into Place
Battery cable
Port CN19
Downward Leftward
TOEP_C710616_38H_7_0.book 125 ページ ２０１５年１１月１１日 水曜日 午後７時４０分