YASKAWA MOTOMAN FS100 - Page 29

3 Data Setting and Touch Panel I/F Instructions
FS100 3.2 Details on Interface Panel Setting Items
3-16
HW1480724
HW1480724
The following table "Touch Panel I/F" describes the buttons corre-
sponding to icon types.
The light turns on when the status of input signal (indicated value) is ON,
whereas it turns off when OFF.
Table 3-4: Touch Panel I/F
No. Items Icon Icon Type
0,1,2 Circle indication light
ON
OFF
Indicates the status of allocated signals.
The light turns on when the status of input signal (indicated
value) is ON, whereas it turns off when OFF.
3,4,5 Square indication
light 1
ON
OFF
Indicates the status of allocated signals.
The light turns on when the status of input signal (indicated
value) is ON, whereas it turns off when OFF.
6,7,8 Square indication
light 2
ON
OFF
Indicates the status of allocated signals.
The light turns on when the status of input signal (indicated
value) is ON, whereas it turns off when OFF.
9,10,
11,12
Selector switch Indicates the status of allocated signals.
When a selector switch is set to "left: ON" or "2-point output):
The switch points left when the status of input signal (indicated
value) is ON, whereas it points right when OFF.
When a selector switch is set to "right: ON":
The switch points right when the status of input signal
(indicated value) is ON, whereas it points left when OFF.
16,17,
18,19
Counter (3 digits)
Counter (6 digits)
Indicates the allocated variables or registers.
* The BG color of the preset counter is
white.
29/39