2-1
158813-1CD
HW1480080
MH80 Manipulator
2 Transport
2.1 Transporting Method
2 Transport
2.1 Transporting Method
• Sling and crane or forklift operations must be performed by
authorized personnel only.
Failure to observe this caution may result in injury or damage.
• Avoid excessive vibration or shock during transport.
The system consists of precision components. Failure to observe this
caution may adversely affect performance.
• The mass of the manipulator is approximately 585 kg
including the shipping bolts and brackets. Use a wire rope
strong enough to withstand the mass.
• The attached eyebolts are designed to support the
manipulator mass. Never use them for anything other
than transporting the manipulator.
• Mount the shipping bolts and brackets before transporting
the manipulator.
• With any transportation equipment, make sure to avoid
external force on the arm or motor unit when transporting
the manipulator.
To Next Page
Loading...
