Working with MotoAdmin 27
Back
Calls previous job in job history
Next
Calls next job in job history
Edit
Opens job in job editor window
Goto Var:
Öpens displayed variable directly
Goto IN#:
Opens displayed input directly
Goto OT#:
Opens displayed output directly
Goto Job:
Open displayed job directly
Table 5 Context menu job window
Displayed job
The jobname of the currently displayed job in job window is written below the job window.
4.13 Edit Jobs
Editing job, which can be initiated by selecting menu Edit... in context menu of job window is
done without checking syntax. Therefore it is only suitable for experienced programmers.
Other less experienced programmers can use MotoAdmin for downloading/uploading job files
to PC. Then they should use JobEditor software to edit file with automatic syntax check.
In the Edit window job content and also job header can edited without limitations. To store
modificated job on robot controller select Save button..
Figure 17 Job Editor window for ascii based editing of jobs
Yaskawa Europe GmbH 22.08.2011
To Next Page
Loading...
