Working with MotoAdmin 33
4.17 Saving, Loading and Deleting files
MotoAdmin can transmit jobs and system data from robot to PC and from PC to robot. Saving
and loading data is available after selecting the Floppy button. Dependent on the current secu-
rity level the following operations are possible.
Figure 25 Floppy function
In the first step you have to select the desired operation:
► Save: Transmit data from Robot to PC.
► Load: Transmit data from PC to Robot.
► Delete: Delete data on PC or Robot (only jobs).
Loading data is only accessible in programmer or administrator mode.
In the second step you have to select the data type.
Yaskawa Europe GmbH 22.08.2011
To Next Page
Loading...
