40 Known Limitations
5 Known Limitations
5.1 Linenumber display shows “?”
Due to a bug in some versions of DX100 controller firmware correct linenumber cannot be
reported. To prevent strange application behaviour linenumber display of DX100 controllers
is disabled by default.
To enable linenumber display a specific entry has to be added to the corresponding configura-
tion section in file robot.ini:
[Boot]
Name=default
[Robot0]
Name=default
IPaddr=HTTP.192.168.11.230
Path=\\motoman.local\Data\MMU-
Develop\MotoSoft_Standard\MotoAdmin\V2.10_beta\Source
Controller=4
ShowLinenumber=true
[Robot1]
….
…
22.08.2011 Yaskawa Europe GmbH
To Next Page
Loading...
