4 I/O Signal Allocation
4.1 Setting of Optional Board and I/O Module
4-4
HW1483854
HW1483854
REMOTE REGISTER INPUT ALLOCATION
Sets the first number of the YRC1000 M-register when the remote regis-
ter input data of the CC-Link IE Field is allocated.
Set the number from 0 to 556.
REMOTE REGISTER OUTPUT ALLOCATION
Sets the first number of the YRC1000 M-register when the remote regis-
ter output data of the CC-Link IE Field is allocated.
Set the number from 0 to 556.
7. Press [ENTER].
– The confirmation dialog box appears.
Before selecting the M-register No. to set the CC-Link IE
Field, make sure to use the M-register No. that is not used
for other applications. If the M-register is duplicated, the
processing can not be executed correctly.
To Next Page
Loading...
