YASKAWA MP3000 Series - Communications with a Windows PC (Visual Basic Application); Using Automatic Reception with the MP3000 as a Slave

2.12 Communications with a Windows PC (Visual Basic Application)
Using Automatic Reception with the MP3000 as a Slave
2-324
2.12 Communications with a Windows PC (Visual Basic Application)
The MP3000 can communicate with a Windows PC running a Visual Basic application over an Ethernet
connection by using automatic reception.
This section describes communications when the MP3000 acts a the slave.
Using Automatic Reception with the MP3000 as a Slave
This section describes how to communicate with a PC running Microsoft Visual Basic.Net 2003, by using
automatic reception with the Extended MEMOBUS protocol.
EthernetEthernet
MP3000
218IFD
Winsock
MP3000
(local station)
Automatic reception
(no ladder programming)
Computer
Visual Basic application
Extended MEMOBUS protocol
PC (Visual Basic)
(remote station)
Slave
Communications Protocol
Connection Type
Data Code
Binary or ASCII
Master
TCP or UDP
Extended MEMOBUS