YASKAWA MP3000 Series - Communications with a Windows PC (Visual C++ Application); Using Automatic Reception with the MP3000 as a Slave

2.13 Communications with a Windows PC (Visual C++ Application)
Using Automatic Reception with the MP3000 as a Slave
2-340
2.13 Communications with a Windows PC (Visual C++ Application)
The MP3000 can communicate with a Windows PC running a Visual C++ application over an Ethernet
connection by using automatic reception.
This section describes communications when the MP3000 acts as a slave.
Using Automatic Reception with the MP3000 as a Slave
This section describes how to communicate with a PC running a Microsoft Visual C++.NET application
by using automatic reception with the Extended MEMOBUS protocol.
EthernetEthernet
MP3000
218IFD
Winsock
MP3000
(local station)
Slave
Communications Protocol
Connection Type
TCP or UDP
Data Code
Binary or ASCII
Master
Extended MEMOBUS
PC (Visual C++)
(remote station)
Automatic reception
(no ladder programming)
Computer
Visual C++ application
Extended MEMOBUS protocol