4.2 CPU Module Specifications
4.2.7 System Register Specifications
4-58
FTP Client Status and Control Information
The data in these registers give the FTP client status and control information.
Register Configuration
Register Address Remarks
SW24400
ID101
SB244000 Reserved for system.
SB244001
0: No session created.
1: Session created.
SB244002
0: No connection.
1: Connection established.
SB244003
0: Not logged in.
1: Logged in.
SB244004
0: No upload in progress.
1: Upload in progress.
SB244005
0: No download in progress.
1: Download in progress.
SB244006 to SB244007 Reserved for system.
SB244008
0: Active Mode
1: Passive Mode
SB244009
0: Directory not created.
1: Directory created.
SB24400A
0: No timeout.
1: Timed out.
SB24400B to SB24400F Reserved for system.
SW024401 Error Count
The value is incremented each time an error
occurs.
SW024402 Error Processing Number
0001 hex: Session start processing
0002 hex: Connection processing
0003 hex: Login processing
0004 hex: Passive Mode change processing
0005 hex: Directory creation processing
0006 hex: STOR instruction processing
0007 hex: RETR instruction processing
0008 hex: Logout or disconnect processing
0009 hex: Close processing
000A hex: Session end processing
SW24403 Reserved for system.
SL24404 Reserved for system.
SW24406 to
SW24415
Reserved for system.
SW24416 to
SW24431
ID102 Same as above.
SW24432 to
SW24447
ID103 Same as above.
SW24448 to
SW24463
ID104 Same as above.
SW24464 to
SW24479
ID105 Same as above.
SW24480 to
SW24495
ID106 Same as above.
SW24496 to
SW24511
ID107 Same as above.
SW24512 to
SW24527
ID108 Same as above.
SW24528 to
SW24543
ID109 Same as above.
Continued on next page.
To Next Page
Loading...
Need help?
General
