2.1 CPU Module
2.1.3 Switches
2-8
STOP/SAVE Switch
This switch is used when removing the USB memory device, or when batch saving data to the
USB memory.
• Lightly press this switch to prepare the USB memory device for removal. The USB memory
device can be safely removed when the USB status indicator changes from flashing to not lit.
• Press and hold this switch for at least 2 seconds to save all of the data to the USB memory.
The display will show the progress of saving.
Open the cover.
STOP/SAVE switch
To Next Page
Loading...
Need help?
General
