900-200-100 22/57
1. Checking Products
1.1. Checking Products on Delivery
■When the Safety Module is Not Connected to the SERVOPACK
1. Check the nameplate (ratings) to confirm that the product is the one that was ordered.
For the nameplate (ratings), refer to 1.2 Nameplate (Ratings) and Model Designation.
2. Mount the Safety Module to the SERVOPACK as described in the enclosed Σ-V Series AC SERVOPACK
Safety Module with FT900 Specification Installation Guide.
3. Treatment of the connector (CN8□) of the SERVOPACK
The handling of CN8□ of the SERVOPACK by combination of the Safety Module is as follows.
*1 : The safety jumper connector should be connected because of not available.
To Next Page
Loading...
