YASKAWA SGDV-OSA01A - SERVOPACK Installation; EMC Installation Conditions and Wiring

900-200-100 35/57
3. SERVOPACK Installation
3.1. EMC Installation Conditions
This section gives the installation conditions that were used for EMC certification testing.
The EMC installation conditions that are given here are the conditions that were used to pass testing criteria at
Yaskawa. The EMC level may change under other conditions, such as the actual installation structure and wiring
conditions. These Yaskawa products are designed to be built into equipment. Therefore, you must implement EMC
measures and confirm compliance for the final equipment.
The applicable standards are EN 55011 group 1 class A, EN 61000-6-2, EN 61000-6-4, and EN 61800-3
(category C2, second environment).
3.1.1. SGDV-OSA01A
■Three-Phase, 400 VAC
・SGD7S-□□□D□0□ + SGDV-OSA01A
Symbol
Cable Name
Specification
①
I/O Signal Cable
Shielded cable
②
Servomotor Main Circuit Cable
Shielded cable
③
Encoder Cable
Shielded cable
④
Main Circuit Power Cable
Shielded cable
⑤
Communications Cable
Shielded cable
⑥
Safety signal cable
Shielded cable