YASKAWA V1000 SI-S3/V - Page 30

10 MEMOBUS/Modbus Data Table
30 YASKAWA ELECTRIC SIEP C730600 24A V1000 Option CANopen Technical Manual
00ACH
Motor Speed (Open Loop Vector
only)
r/min units <4>
00ADH 0.01% units
00B0H Option Code
Register contains ASCII code of 3rd and 4th digit of the option card type number. Example: Register value is 5343H for
“P3” if a SI-P3 option card is installed.
00B5H
Frequency Reference After Soft-
starter
r/min units <4>
00B6H 0.01% units
00B7H
Frequency Reference
r/min <4>
00B8H 0.01% units
00BFH oPE Error Number
00C0H
Fault contents 3
bit 0 Reserved
bit 1 Undervoltage (Uv1)
bit 2 Control Power Supply Undervoltage (Uv2)
bit 3 Soft Charge Circuit Fault (Uv3)
bit 4 Reserved
bit 5 Ground Fault (GF)
bit 6 Overcurrent (oC)
bit 7 Overvoltage (ov)
bit 8 Heatsink Overheat (oH)
bit 9 Heatsink Overheat (oH1)
bit A Motor Overload (oL1)
bit B Drive Overload (oL2)
bit C Overtorque Detection 1 (oL3)
bit D Overtorque Detection 2 (oL4)
bit E Dynamic Braking Transistor Fault (rr)
bit F Braking Resistor Overheat (rH)
00C1H
Fault contents 4
bit 0 External Fault at input terminal S3 (EF3)
bit 1 External Fault at input terminal S4 (EF4)
bit 2 External Fault at input terminal S5 (EF5)
bit 3 External Fault at input terminal S6 (EF6)
bit 4 Reserved
bit 5 Overspeed (oS)
bit 6 Excessive Speed Deviation (dEv)
bit 7 PG Disconnected (PGo)
bit 8 Input Phase Loss (PF)
bit 9 Output Phase Loss (LF)
bit A Motor Overheat (PTC input) (oH3)
bit B Digital Operator Connection Fault (oPr)
bit C EEPROM Write Error (Err)
bit D Motor Overheat Fault (PTC input) (oH4)
00C2H
Fault contents 5
bit 0 MEMOBUS/Modbus Communication Error (CE)
bit 1 Option Communication Error (bUS)
bit 4 Control Fault (CF)
bit 5 Reserved
bit 6 Option External Fault (EF0)
bit 7 PID Feedback Loss (FbL)
bit 8 Undertorque Detection 1 (UL3)
bit 9 Undertorque Detection 2 (UL4)
bit A High Slip Braking Overload (oL7)
bit F Hardware fault (includes oFx)
00C3H
Fault contents 6
bit 0 to 4 Reserved
bit 5 Output Current Imbalance (LF2)
bit 6 Pullout Detection (Sto)
bit 7 PG Disconnected (PGo)
bit 8 Reserved
bit A Too many speed search restarts (SEr)
bit B to F Reserved
00C4H
Fault contents 7
bit 0 PID Feedback Loss (FbH)
bit 1 External Fault 1, input terminal S1 (EF1)
bit 2 External Fault 2, input terminal S2 (EF2)
bit 3 Mechanical Weakening Detection 1 (oL5)
bit 4 Mechanical Weakening Detection 2 (UL5)
bit 5 Current Offset Fault (CoF)
bit 6 Reserved
bit 7 Reserved
bit 8 DriveWorksEZ fault (dWFL)
Register No. Contents