8 YASKAWA ELECTRIC SIEP C730600 24A V1000 Option CANopen Technical Manual
3 Receiving
3 Receiving
Please perform the following tasks after receiving the CANopen Option:
• Inspect the CANopen Option for damage.
If the CANopen Option appears damaged upon receipt, contact the shipper immediately.
• Verify receipt of the correct model by checking the information on the PCB (see Figure 1).
• If you have received the wrong model or the CANopen Option does not function properly, contact your supplier.
◆ Contents and Packaging
Table 2 Contents of Package
◆ Tool Requirements
A Phillips screwdriver (for screw size <1> #1 or #2, U.S. standard size) is required to install the CANopen Option.
<1> Screw sizes vary by drive capacity. Select a screwdriver that matches the drive capacity.
Note: Tools required to prepare CANopen cables for wiring are not listed in this manual.
Description: Option Unit Ground Cables Warning Labels Installation Manual
_
Quantity: 1411
MANUAL
To Next Page
Loading...
