Yealink MVC660 User Manual

| Troubleshooting | 71
• Restarting the Device
• Checking the Device Status
Upgrading System Software
Windows Update is a service provided by Microsoft which provides security updates and functionality
updates to Windows operating systems and its installed components. The system software (including
Windows, the Camera-Hub/UVC86/UVC84/UVC80/UVC50/UVC40/UVC30 Room, and the MTouch
Ⅱ)
can
be automatically upgraded via windows update by default. Otherwise, you should enable automatically
windows update or upgrade the devices manually.
Note: You can also upgrade the devices on the Yealink RoomConnect plug-in under Windows or on
the Yealink Management Cloud Service/Yealink Device Management Platform.
For more information on how to upgrade the devices on the Yealink RoomConnect plug-in, please
refer to Yealink RoomConnect User Guide.
For more information on how to upgrade the devices on Yealink Management Cloud Service/Yealink
Device Management Platform, please refer to Yealink Management Cloud Service Administrator
Guide/Yealink Device Management Platform Administrator Guide.
• Enabling Automatic Windows Update
Enabling Automatic Windows Update
Procedure
1. Tap More > Setting.
2. Enter the administrator password (default: sfb) to go to the Settings page.
3. Tap Windows Settings.
4. Select Administrator from the bottom-left corner and then enter the administrator password.
5.
Tap the button, go to Settings > Upgrade & Security > Windows Update, and tap Advanced
options.
6. Enable Automatically download updates, even over metered data connections(charge may
apply).
Firmware for Each Device
The firmware versions of the devices in the MVC/MVC
Ⅱ
system need to match each other.
The following table lists the associated and latest firmware for each device:
Device Model Firmware Version
Camera-Hub 84.421.0.5.rom or later
UVC84 262.410.0.15 or later
UVC80/UVC50 92.421.0.10 or later
UVC40 128.410.0.10 or later
UVC30/UVC30 Camera Content 105.421.0.5or later
Yealink Plug-in Software (Yealink RoomConnect) 2.22.33.0 or later
MTouch
Ⅱ
126.410.0.5.rom or later

Yealink MVC660 Specifications

General

Brand	Yealink
Model	MVC660
Category	Conference System
Language	English