EasyManuals Logo

Yealink SIP-T27G Administrator's Guide

Yealink SIP-T27G
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #132 background imageLoading...
Page #132 background image
Using Handsets with T57W/T54W/T53W/T53 Phones
129
The handset can only receive incoming calls via the assigned incoming line(s). You can assign incoming lines to all
handsets that are registered to the same phone.
Note: You can only assign one outgoing line and one incoming line for the CP930W. And make sure that the outgoing line and
the incoming line are the same line.
Topic
Number Assignment Configuration
Number Assignment Configuration
The following table lists the parameters you can use to assign lines.
Parameter
handset.X.incoming_lines
[1]
<y0000000000xx>.cfg
Description
It configures the lines to receive incoming calls for a specific handset.
Permitted
Values
1-Line 1
2-Line 2
3-Line 3
4-Line 4
5-Line 5
Multiple line IDs are separated by commas.
Default
The incoming line for Corded phone is line 1-line5.
The incoming line for handset 2 is line 2.
The incoming line for handset 3 is line 3.
The incoming line for handset 4 is line 4.
The incoming line for handset 5 is line 5.
Web UI
Account > Number Assignment > Incoming lines
Handset UI
W53H/W56H:
OK > Settings > Telephony > Incoming Lines (Default PIN:0000) > HandsetX
[1]
DD Phone:
Menu > Settings > Advanced Settings (default password: 0000) > Incoming Lines
Parameter
handset.X.dial_out_lines
[1]
<y0000000000xx>.cfg
Description
It configures the lines to place outgoing calls for a specific handset.
Multiple line IDs are separated by commas.
Permitted
Values
1-Line 1
2-Line 2
3-Line 3
4-Line 4
5-Line 5
Default
The outgoing line for Corded phone is line 1-line5.
The outgoing line for handset 2 is line 2.
The outgoing line for handset 3 is line 3.

Table of Contents

Other manuals for Yealink SIP-T27G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T27G and is the answer not in the manual?

Yealink SIP-T27G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack, Gold
Wall mountableYes
Display diagonal3.66 \
Display resolution240 x 120 pixels
RJ-9 ports quantity2
USB 2.0 ports quantity1
Voice codecsCNG, G.711, G.722, G.723.1, G.726, G.729, G.729ab, VAD, iLBC
Dual-Tone Multi-Frequency (DTMF) modesSIP info
Lines quantity8 lines
Phonebook capacity1000 entries
Number of VoIP accounts6
Bluetooth-
Security algorithmsAES, MD5
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Volume controlDigital
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth210 mm
Width265 mm
Height170.5 mm

Related product manuals