EasyManuals Logo

Yealink SIP-T27G Administrator's Guide

Yealink SIP-T27G
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #330 background imageLoading...
Page #330 background image
Directory
327
Directory > Google Contacts > Google Contact Server
Parameter
google_contact_server.display_mode <y0000000000xx>.cfg
Description
It configures the display mode of the Google contacts.
Note: It works only if "google_contact_server.enable" is set to 1 (Enabled).
Permitted
Values
0-All downloaded Google contacts will be displayed on the phone.
1-Only the Google contacts whose number fields are not empty will be displayed on the phone.
Default
1
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
Signing in to the Google Contact Server
After you allow the IP phone to connect to the Google Contact Server, you can sign in to the Google Contact Server
via the web user interface, so that the Google contacts will appear in the phone directory.
Procedure
1. On your web user interface, select Directory > Google Contacts.
2. In the Authentication field, click Sign In.
A pop-up window and a code are displayed.
3.
Enter the code generated on the web user interface into the pop-up window.
4.
Enter your email address and password.
5.
Allow contact test to access your Google account.
Lightweight Directory Access Protocol (LDAP)
LDAP is an application protocol for accessing and maintaining information services for the distributed directory over
an IP network. You can configure the phones to interface with a corporate directory server that supports LDAP ver-
sion 2 or 3. The following LDAP servers are supported:
l Microsoft Active Directory
l Sun ONE Directory Server
l Open LDAP Directory Server
l Microsoft Active Directory Application Mode (ADAM)
For more information on LDAP, refer to
LDAP Directory on Yealink IP Phones
.
Topics
LDAP Attributes
Securely Storing the LDAP Credentials
LDAP Configuration
LDAP Attributes
The following table lists the most common attributes used to configure the LDAP lookup on the phones.
Abbreviation Name Description
gn givenName First name
cn commonName LDAP attribute is made up from given name joined to surname.
sn surname Last name or family name

Table of Contents

Other manuals for Yealink SIP-T27G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T27G and is the answer not in the manual?

Yealink SIP-T27G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack, Gold
Wall mountableYes
Display diagonal3.66 \
Display resolution240 x 120 pixels
RJ-9 ports quantity2
USB 2.0 ports quantity1
Voice codecsCNG, G.711, G.722, G.723.1, G.726, G.729, G.729ab, VAD, iLBC
Dual-Tone Multi-Frequency (DTMF) modesSIP info
Lines quantity8 lines
Phonebook capacity1000 entries
Number of VoIP accounts6
Bluetooth-
Security algorithmsAES, MD5
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Volume controlDigital
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth210 mm
Width265 mm
Height170.5 mm

Related product manuals