EasyManuals Logo

Yealink SIP-T27G Administrator's Guide

Yealink SIP-T27G
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #174 background imageLoading...
Page #174 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
171
Codec Packetization Time (Minimum) Packetization Time (Maximum)
opus 10ms 20ms
iLBC_15_2kpbs 20ms, 40ms, 60ms
iLBC_13_33kpbs 30ms, 60ms
PTime Configuration
The following table lists the parameter you can use to configure the PTime.
Parameter
account.X.ptime
[1]
<MAC>.cfg
Description
It configures the ptime (in milliseconds) for the codec.
Permitted
Values
0-Disabled
10-10
20-20
30-30
40-40
50-50
60-60
Default
20
Web UI
Account > Advanced > PTime (ms)
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21
(P) E2, X=1-2; for T19(P) E2/CP920, X=1.
Early Media
The early media refers to the media (for example, audio and video) played to the caller before a SIP call is actually
established.
Current implementation supports early media through the 183 message. When the caller receives a 183 message
with SDP before the call is established, a media channel is established. This channel is used to provide the early
media stream for the caller.
You can also configure 180 ring workaround which defines whether to deal with the 180 message received after
the 183 message. When the caller receives a 183 message, it suppresses any local ringback tone and begins to
play the media received. 180 ring workaround allows the phones to resume and play the local ringback tone upon
a subsequent 180 message received.
Topic
Early Media Configuration
Early Media Configuration
The following table lists the parameters you can use to configure the early media.
Parameter
phone_setting.early_media.rtp_sniffer.timeout
[1]
<y0000000000xx>.cfg

Table of Contents

Other manuals for Yealink SIP-T27G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T27G and is the answer not in the manual?

Yealink SIP-T27G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack, Gold
Wall mountableYes
Display diagonal3.66 \
Display resolution240 x 120 pixels
RJ-9 ports quantity2
USB 2.0 ports quantity1
Voice codecsCNG, G.711, G.722, G.723.1, G.726, G.729, G.729ab, VAD, iLBC
Dual-Tone Multi-Frequency (DTMF) modesSIP info
Lines quantity8 lines
Phonebook capacity1000 entries
Number of VoIP accounts6
Bluetooth-
Security algorithmsAES, MD5
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Volume controlDigital
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth210 mm
Width265 mm
Height170.5 mm

Related product manuals