EasyManuals Logo

Yealink SIP-T27G Administrator's Guide

Yealink SIP-T27G
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #495 background imageLoading...
Page #495 background image
General Features
492
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21
(P) E2, X=1-2; for T19(P) E2/CP920, X=1.
Return Code for Refused Call
You can define the return code and reason of the SIP response message for the refused call. The caller’s phone
LCD screen displays the reason according to the received return code. Available return codes and reasons are:
l 404 (Not Found)
l 480 (Temporarily Unavailable)
l 486 (Busy Here)
l 603 (Decline)
Topic
Return Code for Refused Call Configuration
Return Code for Refused Call Configuration
The following table lists the parameters you can use to configure the return code for the refused call.
Parameter
features.normal_refuse_code <y0000000000xx>.cfg
Description
It configures a return code and reason of SIP response messages when the phone rejects an incom-
ing call. A specific reason is displayed on the caller’s phone screen.
Permitted
Values
404-Not Found
480-Temporarily Unavailable
486-Busy Here
600-Busy Everywhere
603-Decline
Default
486
Web UI
Features > General Information > Return Code When Refuse
Return Code for Unanswered Call
You can define the return code and reason of the SIP response message for the unanswered call. The caller’s
phone LCD screen displays the reason according to the received return code. Available return codes and reasons
are:
l 404 (Not Found)
l 480 (Temporarily Unavailable)
l 486 (Busy Here)
l 603 (Decline)
This feature is not applicable to T48G/T46G/T42G/T41P/T29G phones.
Topic
Return Code for Unanswered Call Configuration
Return Code for Unanswered Call Configuration
The following table lists the parameters you can use to configure the return code for the refused call.
Parameter
features.no_answer_code <y0000000000xx>.cfg

Table of Contents

Other manuals for Yealink SIP-T27G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T27G and is the answer not in the manual?

Yealink SIP-T27G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack, Gold
Wall mountableYes
Display diagonal3.66 \
Display resolution240 x 120 pixels
RJ-9 ports quantity2
USB 2.0 ports quantity1
Voice codecsCNG, G.711, G.722, G.723.1, G.726, G.729, G.729ab, VAD, iLBC
Dual-Tone Multi-Frequency (DTMF) modesSIP info
Lines quantity8 lines
Phonebook capacity1000 entries
Number of VoIP accounts6
Bluetooth-
Security algorithmsAES, MD5
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Volume controlDigital
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth210 mm
Width265 mm
Height170.5 mm

Related product manuals