EasyManuals Logo

Yealink SIP-T27G Administrator's Guide

Yealink SIP-T27G
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #182 background imageLoading...
Page #182 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
179
are using the phone handset or a headset.
Permitted
Values
Integer from 1 to 3
Default
2
Supported
Devices
T57W, T54W, T53W, T53, T48U, T46U, T43U, T42U
Smart Noise Filtering
The phones can block out the slight noise from the far party when there is no speech in a call, and at the same time
filter out the common transient noise (door closing, table knocking, and so on).
Topic
Smart Noise Filtering Configuration
Smart Noise Filtering Configuration
The following table lists the parameter you can use to configure smart noise filtering.
Parameter
features.noise_filtering_rev.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to block out the slight noise from the far end when there is no speech
in a call.
Note: After smart noise filtering is enabled, if the far end is playing music or calling a voice service, the
background music will also be eliminated when there is no speech in a call.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
T57W, T54W, T53W, T53, T48U, T46U, T43U, T42U, CP920
Web UI
Settings > Voice > Smart Noise Filtering > Smart Noise Filtering
DTMF
DTMF (Dual Tone Multi-frequency) tone, better known as touch tone. DTMF is the signal sent from the IP phone to
the network, which is generated when pressing the IP phone’s keypad during a call. Each key pressed on the IP
phone generates one sinusoidal tone of two frequencies. One is generated from a high-frequency group and the
other from a low-frequency group.
Topics
DTMF Keypad
Transmitting DTMF Digit
Suppress DTMF Display
Transfer via DTMF
Local DTMF Tone
DTMF Keypad
The DTMF keypad is laid out in a 4×4 matrix, with each row representing a low frequency, and each column rep-
resenting a high frequency. Pressing a digit key (such as '1') will generate a sinusoidal tone for each of two fre-
quencies (697 and 1209 hertz (Hz)).
DTMF Keypad Frequencies:

Table of Contents

Other manuals for Yealink SIP-T27G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T27G and is the answer not in the manual?

Yealink SIP-T27G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack, Gold
Wall mountableYes
Display diagonal3.66 \
Display resolution240 x 120 pixels
RJ-9 ports quantity2
USB 2.0 ports quantity1
Voice codecsCNG, G.711, G.722, G.723.1, G.726, G.729, G.729ab, VAD, iLBC
Dual-Tone Multi-Frequency (DTMF) modesSIP info
Lines quantity8 lines
Phonebook capacity1000 entries
Number of VoIP accounts6
Bluetooth-
Security algorithmsAES, MD5
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Volume controlDigital
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth210 mm
Width265 mm
Height170.5 mm

Related product manuals