EasyManuals Logo

Yealink SIP-T27G Administrator's Guide

Yealink SIP-T27G
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #496 background imageLoading...
Page #496 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
493
Description
It configures a return code and reason of SIP response messages when the phone does not answer
an incoming call. A specific reason is displayed on the caller’s phone screen.
Permitted
Values
404-Not Found
480-Temporarily Unavailable (Temporarily not available)
486-Busy Here
600-Busy Everywhere
603-Decline
Default
486
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
Web UI
Features > General Information > Return Code When No Answer
Hide Feature Access Codes
Hide Feature Access Codes feature enables the IP phone to display the feature name instead of the dialed feature
access code automatically. For example, the dialed call park code will be replaced by the identifier “Call Park”
when you park an active call.
The hide feature access codes feature is applicable to the following features:
l Voice Mail
l Pick up
l Group Pick up
l Barge In (not applicable to T19(P) E2/CP920 phones)
l Retrieve
l Call Park
l Call Pull (not applicable to T19(P) E2/CP920 phones)
Topic
Hide Feature Access Codes Configuration
Hide Feature Access Codes Configuration
The following table lists the parameters you can use to configure the hide feature access codes.
Parameter
features.hide_feature_access_codes.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display the feature name instead of the feature access code when
dialing and talking.
The following feature access codes will be replaced when this feature is enabled:
l Voice Mail
l Pick up
l Group Pick up
l Barge In
l Retrieve
l Call Park
l Group Park
l Call Pull
Permitted
Values
0-Disabled
1-Enabled

Table of Contents

Other manuals for Yealink SIP-T27G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T27G and is the answer not in the manual?

Yealink SIP-T27G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack, Gold
Wall mountableYes
Display diagonal3.66 \
Display resolution240 x 120 pixels
RJ-9 ports quantity2
USB 2.0 ports quantity1
Voice codecsCNG, G.711, G.722, G.723.1, G.726, G.729, G.729ab, VAD, iLBC
Dual-Tone Multi-Frequency (DTMF) modesSIP info
Lines quantity8 lines
Phonebook capacity1000 entries
Number of VoIP accounts6
Bluetooth-
Security algorithmsAES, MD5
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Volume controlDigital
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth210 mm
Width265 mm
Height170.5 mm

Related product manuals