Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
342
Values
Default
5
Example: Configuring a Directory List
The following example shows the configuration for the directory list.
Customize the directory list file, and then place this file to the provisioning server “http://192.168.10.25”.
Example
static.directory_setting.url = http://192.168.10.25
/favorite_setting.xml
After provisioning, you can press the Directory/Dir soft key to access the desired contact list quickly.
Directory Search Settings
You can configure how the phones search contacts and whether to highlight the matched keywords for contact
searching.
The following shows the search results on T46S/G phones:
Topic
Directory Search Settings Configuration
Directory Search Settings Configuration
The following table lists the parameters you can use to configure directory search settings.
Parameter
directory.search_type <y0000000000xx>.cfg
Description
It configures the search type when searching the contact in Local Directory, Remote Phone Book, Net-
work Directory or Blacklist.
Permitted
Values
0-Approximate string matching, the phone will search the contact numbers or names contain the
entered character(s).
1-Prefix matching, the phone will search the contact numbers or names start with the entered char-
acter(s).
Default
0
Parameter
phone_setting.search.highlight_keywords.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to highlight the matched characters in the search results.
Permitted
Values
0-Disabled
1-Enabled
To Next Page
Loading...
Need help?
General
Weight and Dimensions
