EasyManuals Logo

Yealink SIP-T27G Administrator's Guide

Yealink SIP-T27G
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #187 background imageLoading...
Page #187 background image
Audio Features
184
RTCP-XR Configuration
The following table lists the parameters you can use to configure the RTCP-XR.
Parameter
voice.rtcp_xr.enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables the phone to send RTCP-XR packets.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Settings > Voice Monitoring > Voice RTCP-XR Report
Parameter
voice.rtcp.enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables the phone to send RTCP packets.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Parameter
voice.rtcp_cname
[1]
<y0000000000xx>.cfg
Description
It configures the cname of the RTCP packets.
Permitted
Values
String
Default
Blank
[1]
If you change this parameter, the phone will reboot to make the change take effect.
VQ-RTCPXR
The VQ-RTCPXR mechanism, compliant with RFC 6035, sends the service quality metric reports contained in SIP
PUBLISH messages to the central report collector.
A wide range of performance metrics are generated in the following three ways:
l Based on current values, such as jitter, jitter buffer max, and round trip delay.
l Covers the time period from the beginning of the call until the report is sent, such as network packet loss.
l Computed using other metrics as input, such as listening Mean Opinion Score (MOS-LQ) and conversational
Mean Opinion Score (MOS-CQ).
Topics
Voice Quality Reports
VQ-RTCPXR Display
Central Report Collector
Voice Quality Reports
Three types of quality reports can be enabled:
l
Session: Generated at the end of a call.
l
Interval: Generated during a call at a configurable period.
l
Alert: Generated when the call quality degrades below a configurable threshold.
Topic
Voice Quality Reports Configuration

Table of Contents

Other manuals for Yealink SIP-T27G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T27G and is the answer not in the manual?

Yealink SIP-T27G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack, Gold
Wall mountableYes
Display diagonal3.66 \
Display resolution240 x 120 pixels
RJ-9 ports quantity2
USB 2.0 ports quantity1
Voice codecsCNG, G.711, G.722, G.723.1, G.726, G.729, G.729ab, VAD, iLBC
Dual-Tone Multi-Frequency (DTMF) modesSIP info
Lines quantity8 lines
Phonebook capacity1000 entries
Number of VoIP accounts6
Bluetooth-
Security algorithmsAES, MD5
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Volume controlDigital
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth210 mm
Width265 mm
Height170.5 mm

Related product manuals