EasyManuals Logo

Yealink SIP-T27G Administrator's Guide

Yealink SIP-T27G
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #149 background imageLoading...
Page #149 background image
Audio Features
146
Audio Features
This chapter describes the audio sound quality features and options you can configure for the IP phone.
Topics
Alert Tone
Touch Tone
Ring Tones
Distinctive Ring Tones
Ringer Device
Audio Volume
Tones
Audio Codecs
Packetization Time (PTime)
Early Media
Headset Prior
Dual Headset
Acoustic Clarity Technology
DTMF
Voice Quality Monitoring (VQM)
Alert Tone
You can configure the following audio alert for the phone:
l Redial tone: allow the phones to continue to play the dial tone after inputting the preset numbers on the dialing
screen.
l Voice mail tone: allow the IP phone to play a warning tone when receiving a new voice mail. You can customize
the warning tone or select specialized tone sets (vary from country to country) for your IP phone.
l Send tone: allow the IP phone to play a key tone when you press the send key. It works only if the key tone is
enabled.
l Dial tone: allow the IP phone to play a specific dial tone for a specified time.
l Key tone: allow the IP phone to play a key tone when you press any key.
Topic
Alert Tone Configuration
Alert Tone Configuration
The following table lists the parameters you can use to configure the alert tone.
Parameter
features.redial_tone <y0000000000xx>.cfg
Description
It configures that after you enter a specific number on the dialing screen, the phone will replay the dial
tone.
Example:
features.redial_tone = 123
The phone will continue to play the dial tone after entering “123 on the dialing screen.
Permitted
Values
Integer within 6 digits
Default
Blank
Web UI
Features > Audio > Redial Tone

Table of Contents

Other manuals for Yealink SIP-T27G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T27G and is the answer not in the manual?

Yealink SIP-T27G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack, Gold
Wall mountableYes
Display diagonal3.66 \
Display resolution240 x 120 pixels
RJ-9 ports quantity2
USB 2.0 ports quantity1
Voice codecsCNG, G.711, G.722, G.723.1, G.726, G.729, G.729ab, VAD, iLBC
Dual-Tone Multi-Frequency (DTMF) modesSIP info
Lines quantity8 lines
Phonebook capacity1000 entries
Number of VoIP accounts6
Bluetooth-
Security algorithmsAES, MD5
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Volume controlDigital
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth210 mm
Width265 mm
Height170.5 mm

Related product manuals