EasyManuals Logo

Yealink SIP-T27G Administrator's Guide

Yealink SIP-T27G
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #169 background imageLoading...
Page #169 background image
Audio Features
166
Codec Algorithm Reference Bit Rate Sample Rate Packetization Time
iLBC_15_2kbps iLBC RFC 3952 15.2 Kbps 8 Ksps 20ms
iLBC_13_33kbps iLBC RFC 3952 13.33 Kbps 8 Ksps 30ms
opus opus RFC 6716
8-12 Kbps
16-20 Kbps
28-40 Kbps
48-64 Kbps
64-128 Kbps
8 Ksps
12 Ksps
16 Ksps
24 Ksps
48 Ksps
20ms
Note: The network bandwidth necessary to send the encoded audio is typically 5~10% higher than the bit rate due to pack-
etization overhead. For example, a two-way G.722 audio call at 64 Kbps consumes about 135 Kbps of network bandwidth.
The Opus codec supports various audio bandwidths, defined as follows:
Abbreviation Audio Bandwidth Sample Rate (Effective)
NB (narrowband) 4 kHz 8 kHz
MB (medium-band) 6 kHz 12 kHz
WB (wideband) 8 kHz 16 kHz
SWB (super-wideband) 12 kHz 24 kHz
FB (fullband) 20 kHz 48 kHz
Note: The T40P/T40G/T23P/T23G/T21(P) E2/T19(P) E2 phones support using WB for Opus encoding, and using NB, MB,
WB, SWB and FB for Opus decoding.
The T57W/T54W/T53W/T53/T48U/T48S/T46U/T46S/T43U/T42U/T42S/T41S/T27G phones support using WB
(default) or NB for Opus encoding, and using NB, MB, WB, SWB and FB for Opus decoding.
The CP920 phones support using anyone from NB to WB for opus encoding, and using NB, MB, WB, SWB and FB
for opus decoding.
The phones support up to two calls or a three-way conference when using Opus.
The following table lists the audio codecs supported by each phone model:
Phone Model Supported Audio Codecs
Default Audio
Codecs
T48G/T46G/T42G/T41P/T29G
G722, PCMA, PCMU, G729, G726-16,
G726-24, G726-32, G726-40, G723_53,
G723_63, iLBC_15_2kpbs, iLBC_13_
33kpbs
G722, PCMA, PCMU,
G729
T57W/T54W/T53W/T53/T48U/T48S/T46U/T46S/
T43U/T42S/T42U/T41S/T27G
G722, PCMA, PCMU, G729, G726-16,
G726-24, G726-32, G726-40, G723_53,
G723_63, opus, iLBC_15_2kpbs, iLBC_
13_33kpbs
G722, PCMA, PCMU,
G729
T40P/T40G/T23P/T23G/T21(P) E2/
T19(P) E2
G722, PCMA, PCMU, G729, G726-16,
G726-24, G726-32, G726-40, opus, iLBC_
15_2kpbs, iLBC_13_33kpbs
G722, PCMA, PCMU,
G729

Table of Contents

Other manuals for Yealink SIP-T27G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T27G and is the answer not in the manual?

Yealink SIP-T27G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack, Gold
Wall mountableYes
Display diagonal3.66 \
Display resolution240 x 120 pixels
RJ-9 ports quantity2
USB 2.0 ports quantity1
Voice codecsCNG, G.711, G.722, G.723.1, G.726, G.729, G.729ab, VAD, iLBC
Dual-Tone Multi-Frequency (DTMF) modesSIP info
Lines quantity8 lines
Phonebook capacity1000 entries
Number of VoIP accounts6
Bluetooth-
Security algorithmsAES, MD5
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Volume controlDigital
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth210 mm
Width265 mm
Height170.5 mm

Related product manuals