EasyManuals Logo

Yealink SIP-T27G Administrator's Guide

Yealink SIP-T27G
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #184 background imageLoading...
Page #184 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
181
Web UI
Account > Advanced > DTMF Payload Type(96~127)
Parameter
account.X.dtmf.info_type
[1]
<MAC>.cfg
Description
It configures the DTMF info type.
Note: It works only if “account.X.dtmf.type” is set to 2 (SIP INFO) or 3 (RFC2833 + SIP INFO).
Permitted
Values
1-DTMF-Relay
2-DTMF
3-Telephone-Event
Default
1
Web UI
Account > Advanced > DTMF Info Type
Parameter
features.dtmf.repetition <y0000000000xx>.cfg
Description
It configures the repetition times for the phone to send the end RTP Event packet during an active call.
Permitted
Values
1, 2 or 3
Default
3
Web UI
Features > General Information > DTMF Repetition
Parameter
features.dtmf.duration
[2]
<y0000000000xx>.cfg
Description
It configures the duration time (in milliseconds) for each digit when a sequence of DTMF tones is
played out automatically.
Note: If the time interval between two DTMF digits is less than this value, two or more same DTMF
digits could be identified as one DTMF digit. This may cause the loss of one or more DTMF digits. For
example, 2662 may be identified as 262. If so, you can modify the value of this parameter to a little
lower than the default value.
Permitted
Values
Integer from 0 to 700
Default
100
Parameter
features.dtmf.volume <y0000000000xx>.cfg
Description
It configures the volume of the DTMF tone (in dB).
Permitted
Values
Integer from -33 to 0
Default
-10
Parameter
features.dtmf.min_interval <y0000000000xx>.cfg
Description
It configures the minimum inter-digit time (in milliseconds) between digits when a sequence of DTMF
tones is played out automatically.
Permitted
Values
Integer from 0 to 300
Default
50

Table of Contents

Other manuals for Yealink SIP-T27G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T27G and is the answer not in the manual?

Yealink SIP-T27G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack, Gold
Wall mountableYes
Display diagonal3.66 \
Display resolution240 x 120 pixels
RJ-9 ports quantity2
USB 2.0 ports quantity1
Voice codecsCNG, G.711, G.722, G.723.1, G.726, G.729, G.729ab, VAD, iLBC
Dual-Tone Multi-Frequency (DTMF) modesSIP info
Lines quantity8 lines
Phonebook capacity1000 entries
Number of VoIP accounts6
Bluetooth-
Security algorithmsAES, MD5
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Volume controlDigital
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth210 mm
Width265 mm
Height170.5 mm

Related product manuals