EasyManuals Logo

Yealink SIP-T27G Administrator's Guide

Yealink SIP-T27G
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #261 background imageLoading...
Page #261 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
258
Phone UI
Menu > Features > DSS Keys > Line Key X > Label
Parameter
linekey.X.extension
[1]
<y0000000000xx>.cfg
Descrip-
tion
For multicast paging:
It configures the channel of the multicast paging group.
For the BLF/BLF list/intercom feature:
It configures the pickup code.
Note: It is only applicable when “linekey.X.type is set to 14, 16, 24 or 39.
Permitted
Values
For multicast paging:
0 to 31
For the BLF/BLF list/intercom feature:
String within 256 characters
Default
Blank
Supported
Devices
All phones except T19(P) E2 and CP920
Web UI
Dsskey > Line Key > Line KeyX > Extension
Phone UI
Menu > Features > DSS Keys > Line Key X > Channel or
Menu > Features > DSS Keys > Line Key X > PIN/ID or
Menu > Features > DSS Keys > Line Key X > Extension
Parameter
linekey.X.xml_phonebook
[1]
<y0000000000xx>.cfg
Descrip-
tion
It specifies a specific group/phone book when multiple groups/phone books are configured on the
phone.
For example, both Remote Phone Book 1 “Sell and Remote Phone Book 2 “Market” are configured on
the phone, you can configure “linekey.X.xml_phonebook = 0” to specify the Remote Phone Book 1
“Sell for the specific line key. The user can press this line key to access the Remote Phone Book 1
“Sell”.
Note: It is only applicable when “linekey.X.type is set to 22 or 45.
Permitted
Values
Integer from 0 to 48
Default
0
Supported
Devices
All phones except T19(P) E2 and CP920
Web UI
Dsskey > Line Key > Line KeyX > Line
Parameter
features.flash_url_dsskey_led.enable <y0000000000xx>.cfg
Descrip-
tion
It enables or disables the LED indicator of the URL DSS key.
The LED indicator behavior depends on the response message from the server when you press the
URL DSS key on the phone.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Supported
Devices
All phones except T19(P) E2 and CP920

Table of Contents

Other manuals for Yealink SIP-T27G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T27G and is the answer not in the manual?

Yealink SIP-T27G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack, Gold
Wall mountableYes
Display diagonal3.66 \
Display resolution240 x 120 pixels
RJ-9 ports quantity2
USB 2.0 ports quantity1
Voice codecsCNG, G.711, G.722, G.723.1, G.726, G.729, G.729ab, VAD, iLBC
Dual-Tone Multi-Frequency (DTMF) modesSIP info
Lines quantity8 lines
Phonebook capacity1000 entries
Number of VoIP accounts6
Bluetooth-
Security algorithmsAES, MD5
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Volume controlDigital
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth210 mm
Width265 mm
Height170.5 mm

Related product manuals