Yealink SIP-T27G Administrator's Guide

Account Settings
314
Default
1
Supported
Devices
All phones except T19(P) E2 and CP920
Parameter
account.X.phone_setting.call_appearance.transfer_via_new_
linekey
[1]
<MAC>.cfg
Description
It enables or disables to distribute a transferring call to a new line key (the new line key is not seized)
for account X.
If all line keys are seized, the current line key will be used.
Note: The number of the line keys is determined by “account.X.number_of_linekey”. The value con-
figured by this parameter takes precedence over that configured by the parameter “phone_set-
ting.call_appearance.transfer_via_new_linekey”.
Permitted
Values
0-Disabled, the phone will transfer a call on the current line key.
1-Enabled
Default
Blank
Supported
Devices
All phones except T19(P) E2 and CP920
Parameter
phone_setting.call_appearance.conference_via_new_linekey <y0000000000xx>.cfg
Description
It enables or disables to distribute a conference call to a new line key (the new line key is not seized).
If all line keys are seized, the current line key will be used.
Note: The number of the line keys is determined by “account.X.number_of_linekey”. The value con-
figured by the parameter “account.X.phone_setting.call_appearance.conference_via_new_linekey”
takes precedence over that configured by this parameter.
Permitted
Values
0-Disabled, the phone will place a new call using the current line key when pressing the Conf/Con-
ference soft key.
1-Enabled, the phone will place a new call by automatically selecting a new line key (the cor-
responding line key is not seized) when pressing the Conf/Conference soft key. If all line keys are
seized, the current line key will be used.
Default
1
Supported
Devices
All phones except T19(P) E2 and CP920
Parameter
account.X.phone_setting.call_appearance.conference_via_new_
linekey
[1]
<MAC>.cfg
Description
It enables or disables to distribute a conference call to a new line key (the new line key is not seized)
for account X.
If all line keys are seized, the current line key will be used.
Note: The number of the line keys is determined by “account.X.number_of_linekey”. The value con-
figured by this parameter takes precedence over that configured by the parameter “phone_set-
ting.call_appearance.conference_via_new_linekey”.
Permitted
Values
0-Disabled, the phone will place a new call using the current line key when pressing the Conf/Con-
ference soft key.
1-Enabled, the phone will place a new call by automatically selecting a new line key (the cor-
responding line key is not seized) when pressing the Conf/Conference soft key. If all line keys are
seized, the current line key will be used.

Yealink SIP-T27G Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black, Gold
Wall mountable	Yes
Display diagonal	3.66 \
Display resolution	240 x 120 pixels
RJ-9 ports quantity	2
USB 2.0 ports quantity	1
Voice codecs	CNG, G.711, G.722, G.723.1, G.726, G.729, G.729ab, VAD, iLBC
Dual-Tone Multi-Frequency (DTMF) modes	SIP info
Lines quantity	8 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Bluetooth	-
Security algorithms	AES, MD5
Networking standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface type	Gigabit Ethernet
Volume control	Digital
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	210 mm
Width	265 mm
Height	170.5 mm