EasyManuals Logo

Yealink SIP-T27G Administrator's Guide

Yealink SIP-T27G
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #337 background imageLoading...
Page #337 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
334
ldap.extra_attr = title lang
This requires the "title" and “lang” extra attributes set for each contact record on the LDAP server.
Note: It works only if “ldap.enable is set to 1 (Enabled).
Permitted
Values
String
Default
Blank
Supported
Devices
T57W, T54W, T48U, T48S, T46U, T46S
Parameter
ldap.display_extra_attr <y0000000000xx>.cfg
Description
It configures the extra attributes list of each record to be displayed on the phone.
The attribute must start with a “%” symbol. Multiple attributes are separated by spaces.
Example:
ldap.display_extra_attr = %title %lang
The title and lang of the contact record are displayed on the phone screen.
Note: It works only if “ldap.enable is set to 1 (Enabled).
Permitted
Values
String
Default
Blank
Supported
Devices
T57W, T54W, T48U, T48S, T46U, T46S
Parameter
ldap.custom_extra_attr_name <y0000000000xx>.cfg
Description
It configures the custom attribute names of each record that are displayed on the phone.
The valid format is: <custom attribute name on the phone>%<attribute name on the server>. Multiple
attribute names are separated by spaces.
Example:
ldap.custom_extra_attr_name = Comment%title Language%lang
The phone screen displays "Comment: title of the contact record" and "Language: lang of the contact
record".
Note: It works only if “ldap.enable is set to 1 (Enabled).
Permitted
Values
String
Default
Blank
Supported
Devices
T57W, T54W, T48U, T48S, T46U, T46S
Parameter
ldap.anonymous_bind_operation.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to use anonymous identity for accessing the LDAP directory.
Note: It works only if “ldap.enable is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled, if the authentication information is not configured on the phone, the phone can use the
empty one to log into the LDAP server. But if the server does not allow anonymity to log into, the
phone prompts users to enter the corresponding user name and password.

Table of Contents

Other manuals for Yealink SIP-T27G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T27G and is the answer not in the manual?

Yealink SIP-T27G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack, Gold
Wall mountableYes
Display diagonal3.66 \
Display resolution240 x 120 pixels
RJ-9 ports quantity2
USB 2.0 ports quantity1
Voice codecsCNG, G.711, G.722, G.723.1, G.726, G.729, G.729ab, VAD, iLBC
Dual-Tone Multi-Frequency (DTMF) modesSIP info
Lines quantity8 lines
Phonebook capacity1000 entries
Number of VoIP accounts6
Bluetooth-
Security algorithmsAES, MD5
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Volume controlDigital
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth210 mm
Width265 mm
Height170.5 mm

Related product manuals