EasyManuals Logo

Yealink SIP-T27G Administrator's Guide

Yealink SIP-T27G
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #517 background imageLoading...
Page #517 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
514
Description
It enables or disables the hoteling feature.
Permitted
Values
0-Disabled
1-Enabled, users can use any available host (shared) phone by logging in with user credentials. After
logging in, users have access to their own guest profile on the host phone.
Default
0
Parameter
account.X.hoteling.user_id
[1]
<MAC>.cfg
Description
It configures the user ID used to log into the guest profile.
Permitted
Values
String within 99 characters
Default
Blank
Parameter
account.X.hoteling.password
[1]
<MAC>.cfg
Description
It configures the password used to log into the guest profile.
Permitted
Values
String within 99 characters
Default
Blank
Parameter
features.homescreen_softkey.hoteling.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display the Hoteling soft keys such as GuestIn or GuestOut on the
idle screen.
Note: It works only if “account.X.hoteling.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Parameter
hoteling.authentication_mode <y0000000000xx>.cfg
Description
It configures the XML browser hoteling authentication mode.
Note: It works only if “account.X.hoteling.enable” is set to 1 (Enabled).
Permitted
Values
0-The phone uses the hoteling user ID and password as authentication credentials.
1-The phone uses the provisioning user name and password as authentication credentials, and at the
same time provides the hoteling user ID and password in the payload of the message for authen-
tication credentials.
Default
0
Parameter
account.X.hoteling.expires
[1]
<MAC>.cfg
Description
It configures the hoteling subscription expiration time (in seconds).
Permitted
Values
Integer from 30 to 2147483647
Default
3600
Parameter
account.X.hoteling.auto_login_enable
[1]
<MAC>.cfg
Description
It enables or disables the phone to save login credentials automatically when logging into the guest
profile.
Permitted
Values
0-Disabled
1-Enabled

Table of Contents

Other manuals for Yealink SIP-T27G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T27G and is the answer not in the manual?

Yealink SIP-T27G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack, Gold
Wall mountableYes
Display diagonal3.66 \
Display resolution240 x 120 pixels
RJ-9 ports quantity2
USB 2.0 ports quantity1
Voice codecsCNG, G.711, G.722, G.723.1, G.726, G.729, G.729ab, VAD, iLBC
Dual-Tone Multi-Frequency (DTMF) modesSIP info
Lines quantity8 lines
Phonebook capacity1000 entries
Number of VoIP accounts6
Bluetooth-
Security algorithmsAES, MD5
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Volume controlDigital
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth210 mm
Width265 mm
Height170.5 mm

Related product manuals