EasyManuals Logo

Yealink SIP-T27G Administrator's Guide

Yealink SIP-T27G
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #531 background imageLoading...
Page #531 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
528
Values 1-Enabled
Default
0
Parameter
account.X.custom_ua
[1]
<MAC>.cfg
Description
It configures the suffix of User-Agent in SIP request messages from the phone.
Permitted
Values
String within 256 characters
Default
Blank
Parameter
account.X.call_id_mode
[1]
<MAC>.cfg
Description
It configures the constitution of caller ID.
Permitted
Values
0-Use random digits
1Use the combination of the digits and letters
2Use random digits plus MAC address
Default
0
Parameter
account.X.path.enable
[1]
<MAC>.cfg
Description
It enables or disables the phone to carry the Supported:path header in the REGISTER request mes-
sage.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
account.X.insert_outbound_in_route.enable
[1]
<MAC>.cfg
Description
It enables or disables the phone to add outbound server address as the topmost Route header in the
request message.
Note: It works only if the received 200 OK response for the REGISTER request contains the Service
route header.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
account.X.invite_with_rpid_header.enable
[1]
<MAC>.cfg
Description
It enables or disables the phone to add the Remote-Party-ID (RPID) header in the initial INVITE mes-
sage.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
Parameter
account.X.third_part_request_with_route.enable
[1]
<MAC>.cfg
Description
It enables or disables the phone to carry the Route header in the request message which is sent to
the third-party server (for example, a Music On Hold server).
Note: It works only if the received 200 OK response for the REGISTER request contains the Service
route header.
Permitted
0-Disabled

Table of Contents

Other manuals for Yealink SIP-T27G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T27G and is the answer not in the manual?

Yealink SIP-T27G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack, Gold
Wall mountableYes
Display diagonal3.66 \
Display resolution240 x 120 pixels
RJ-9 ports quantity2
USB 2.0 ports quantity1
Voice codecsCNG, G.711, G.722, G.723.1, G.726, G.729, G.729ab, VAD, iLBC
Dual-Tone Multi-Frequency (DTMF) modesSIP info
Lines quantity8 lines
Phonebook capacity1000 entries
Number of VoIP accounts6
Bluetooth-
Security algorithmsAES, MD5
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Volume controlDigital
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth210 mm
Width265 mm
Height170.5 mm

Related product manuals