EasyManuals Logo

Yealink SIP-T27G Administrator's Guide

Yealink SIP-T27G
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #87 background imageLoading...
Page #87 background image
Phone Provisioning
84
Note: It has a lower priority than the value defined by the parameter “static.auto_provision.attempt_
expired_time”.
Permitted
Values
Integer from 1 to 20
Default
10
Parameter
static.auto_provision.attempt_before_failed <y0000000000xx>.cfg
Description
It configures the maximum number of attempts to transfer a file before the transfer fails during auto pro-
visioning.
Permitted
Values
Integer from 1 to 10
Default
3
Parameter
static.auto_provision.retry_delay_after_file_transfer_failed <y0000000000xx>.cfg
Description
It configures the time (in seconds) to wait after a file transfer fails before retrying the transfer via auto
provisioning.
Permitted
Values
Integer from 0 to 300
Default
5
Parameter
static.auto_provision.reboot_force.enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables the phone to reboot after auto provisioning, even if there is no specific con-
figuration requiring a reboot.
Note: It works only for the current auto provisioning process. If you want the phone to reboot after
every auto provisioning process, the parameter must be always contained in the configuration file and
set to 1.
If the phone reboots repeatedly after it is set to 1, you can try to set “static.auto_provision.power_on" to
0 (Off).
Permitted
Values
0-Disabled
1-Enabled
Default
Blank
Parameter
features.action_uri_force_autop <y0000000000xx>.cfg
Description
It enables or disables the phone to end the call for triggering auto provisioning immediately when
receiving an HTTP or HTTPS GET request with the variable value set to AutoP during a call.
Note: It works only if “features.action_uri.enable is set to 1 (Enabled).
Permitted
Values
0-Disabled, the phone triggers auto provisioning after the call.
1-Enabled
Default
0
Parameter
static.auto_provision.power_on <y0000000000xx>.cfg
Description
It triggers the power on feature to on or off.
Permitted
Values
0-Off
1-On, the phone performs auto provisioning when powered on.
Default
1
Web UI
Settings > Auto Provision > Power On

Table of Contents

Other manuals for Yealink SIP-T27G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T27G and is the answer not in the manual?

Yealink SIP-T27G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack, Gold
Wall mountableYes
Display diagonal3.66 \
Display resolution240 x 120 pixels
RJ-9 ports quantity2
USB 2.0 ports quantity1
Voice codecsCNG, G.711, G.722, G.723.1, G.726, G.729, G.729ab, VAD, iLBC
Dual-Tone Multi-Frequency (DTMF) modesSIP info
Lines quantity8 lines
Phonebook capacity1000 entries
Number of VoIP accounts6
Bluetooth-
Security algorithmsAES, MD5
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Volume controlDigital
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth210 mm
Width265 mm
Height170.5 mm

Related product manuals