EasyManuals Logo

Yealink SIP-T27G Administrator's Guide

Yealink SIP-T27G
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #91 background imageLoading...
Page #91 background image
Phone Provisioning
88
Note: If the phone performs auto provisioning when receiving a SIP NOTIFY message which contains
the header “Event: check-sync”, the phone will display the prompt message no matter whether the con-
figuration is updated.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
static.auto_provision.connect.keep_alive <y0000000000xx>.cfg
Description
It enables or disables the long connection for downloading files via auto provisioning.
Permitted
Values
0-Disabled, the phone uses the short connection for downloading files via auto provisioning
1-Enabled
Default
0
Parameter
static.auto_provision.authentication.expired_time <y0000000000xx>.cfg
Description
It configures the timeout (in seconds) after which the authentication pop-up box for auto provisioning
disappears.
Permitted
Values
0-The authentication pop-up box does not disappear from the phone screen automatically.
Integer from 10 to 86400 -The authentication pop-up box automatically disappears from the phone
screen after the designated time.
Default
7200
Parameter
static.auto_provision.dns_resolv_nosys <y0000000000xx>.cfg
Description
It enables or disables the phone to resolve the access URL of the provisioning server using download
libraries mechanism.
Permitted
Values
0-Disabled, the phone resolves the access URL of the provisioning server using the system mech-
anism.
1-Enabled
Default
1
Supported
Devices
T42G, T41P, CP920
Parameter
static.auto_provision.dns_resolv_nretry <y0000000000xx>.cfg
Description
It configures the retry times when the phone fails to resolve the access URL of the provisioning server.
Note: For each different DNS server, it works only if “static.auto_provision.dns_resolv_nosys" is set to
1 (Enabled).
Permitted
Values
Integer from 1 to 10
Default
2
Parameter
static.auto_provision.dns_resolv_timeout <y0000000000xx>.cfg
Description
It configures the timeout (in seconds) for the phone to retry to resolve the access URL of the pro-
visioning server.
Note: For each different DNS server, it works only if “static.auto_provision.dns_resolv_nosys" is set to
1 (Enabled).
Permitted
Values
Integer from 1 to 60
Default
5

Table of Contents

Other manuals for Yealink SIP-T27G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T27G and is the answer not in the manual?

Yealink SIP-T27G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack, Gold
Wall mountableYes
Display diagonal3.66 \
Display resolution240 x 120 pixels
RJ-9 ports quantity2
USB 2.0 ports quantity1
Voice codecsCNG, G.711, G.722, G.723.1, G.726, G.729, G.729ab, VAD, iLBC
Dual-Tone Multi-Frequency (DTMF) modesSIP info
Lines quantity8 lines
Phonebook capacity1000 entries
Number of VoIP accounts6
Bluetooth-
Security algorithmsAES, MD5
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Volume controlDigital
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth210 mm
Width265 mm
Height170.5 mm

Related product manuals