User Guide for the SIP-T46G IP Phone
92
To configure the page icon to indicate status via web user interface:
1. Click on Dsskey->Line Key.
2. Select Enabled from the pull-down list of Enable Page Tips.
3. Click Confirm to accept the change.
Label Length
You can specify labels for some key features, which will be displayed on the idle LCD screen. If
the length of the label exceeds the maximum display length, the phone only displays the first
few characters. You can configure the phone to display more characters via label length feature.
The following figure shows an example of label display when the label length feature is set to
Extended: