EasyManuals Logo

Yealink SIP-T46S Administrator's Guide

Yealink SIP-T46S
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #130 background imageLoading...
Page #130 background image
Using Handsets with T57W/T54W/T53W/T53 Phones
127
Handset Wallpaper
Wallpaper is an image used as the background for the handset idle screen. Users can select an image from hand-
set’s built-in background.
Topic
Handset Wallpaper Configuration
Handset Wallpaper Configuration
The following table lists the parameter you can use to configure the handset wallpaper.
Parameter
custom.handset.wallpaper <y0000000000xx>.cfg
Description
It configures the wallpaper displayed on the handset LCD screen.
Note: It will take effect on all handsets that are registered on the same phone. It works only if “stat-
ic.auto_provision.handset_configured.enable is set to 1 (Enabled).
Permitted
Values
1-Wallpaper1
2-Wallpaper2
3-Wallpaper3
4-Wallpaper4
5-Wallpaper5
Default
-1, do not change the wallpaper set on each handset.
Supported
Devices
W53H, W56H
Handset UI
OK > Settings > Display > Wallpaper
Handset Screen Saver
The screen saver of the handset is designed to protect your LCD screen. You can enable the screen saver to pro-
tect the LCD screen, an analog clock will be activated and appear on the LCD screen after the handset is idle for
approximately 10 seconds.
It is only applicable to W56H/W53H handsets.
Topic
Handset Screen Saver Configuration
Handset Screen Saver Configuration
The following table lists the parameter you can use to configure the handset screen saver.
Parameter
custom.handset.screen_saver.enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables screen saver feature.
Note: It will take effect on all handsets that are registered on the same phone. It works only if “stat-
ic.auto_provision.handset_configured.enable is set to 1 (Enabled).
Permitted
Values
-1-Do not modify the configuration.
0-Disabled
1-Enabled, an analog clock will be activated and appear on the LCD screen if no user activity is
sensed for approximately 10 seconds.

Table of Contents

Other manuals for Yealink SIP-T46S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T46S and is the answer not in the manual?

Yealink SIP-T46S Specifications

General IconGeneral
ManualYes
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Voice codecsCNG, G.711Mu, G.711a, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Lines quantity16 lines
Phonebook capacity1000 entries
Number of VoIP accounts16
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal4.3 \
Display resolution480 x 272 pixels
AC adapter input voltage100 - 240 V
AC adapter output current2 A
AC adapter output voltage5 V
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Volume controlDigital
Number of programmable keys10
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth213 mm
Width244 mm
Height185 mm
Package depth255 mm
Package width274 mm
Package height128 mm

Related product manuals