EasyManuals Logo

Yealink SIP-T46S Administrator's Guide

Yealink SIP-T46S
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #255 background imageLoading...
Page #255 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
252
Description
It enables or disables the minimum password strength limit.
Permitted
Values
0-Disabled
1-Enabled, when the Bluetooth device is paired with the phone, the minimum password strength can-
not be lower than 56bits.
Default
1
Supported
Devices
T57W, T54W, T53W, T53, T48U, T48S, T46U, T46S, T43U, T42U, T42S, T41S, T27G, CP920
Web UI
Features > Bluetooth > High Security Pairing
[1]
If you change this parameter, the phone will reboot to make the change take effect.
Handset/Headset/Speakerphone Mode
Yealink phones support three ways to place/answer a call: using the handset, using the headset or using the speak-
erphone. You can disable the infrequently used audio device as required.
Topic
Handset/Headset/Speakerphone Mode Configuration
Handset/Headset/Speakerphone Mode Configuration
The following table lists the parameters you can use to configure handset/headset/speakerphone mode.
Parameter
features.speaker_mode.enable <y0000000000xx>.cfg
Description
It enables or disables the phone’s speakerphone mode.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Supported
Devices
All phones except CP920
Parameter
features.handset_mode.enable <y0000000000xx>.cfg
Description
It enables or disables the phone’s handset mode.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Supported
Devices
All phones except CP920
Parameter
features.group_listen_in_talking_enable <y0000000000xx>.cfg
Description
It enables or disables the phone to enter into the group listening mode by pressing the Speakerphone
key when you first answer the call using the handset.
Note: The audio is sent only through the handset. So you are able to speak and listen through the
handset, but you can only listen through the speaker.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Supported
All phones except CP920

Table of Contents

Other manuals for Yealink SIP-T46S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T46S and is the answer not in the manual?

Yealink SIP-T46S Specifications

General IconGeneral
ManualYes
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Voice codecsCNG, G.711Mu, G.711a, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Lines quantity16 lines
Phonebook capacity1000 entries
Number of VoIP accounts16
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal4.3 \
Display resolution480 x 272 pixels
AC adapter input voltage100 - 240 V
AC adapter output current2 A
AC adapter output voltage5 V
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Volume controlDigital
Number of programmable keys10
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth213 mm
Width244 mm
Height185 mm
Package depth255 mm
Package width274 mm
Package height128 mm

Related product manuals