EasyManuals Logo

Yealink SIP-T46S Administrator's Guide

Yealink SIP-T46S
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #375 background imageLoading...
Page #375 background image
Call Features
372
T19(P) E2/CP920 phones; handset and Speakerphone key are not applicable to CP920 phones; the
off-hook key is only applicable to CP920 phones.
Permitted
Values
String within 1024 characters
Default
Blank
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21
(P) E2, X=1-2; for T19(P) E2/CP920, X=1.
Live Dialpad
Live Dialpad allows the phones to automatically dial out the entered phone number without pressing the send key
after a designated period of time.
Topic
Live Dialpad Configuration
Live Dialpad Configuration
The following table lists the parameters you can use to configure live dialpad.
Parameter
phone_setting.predial_autodial <y0000000000xx>.cfg
Description
It enables or disables the live dialpad feature.
Permitted
Values
0-Disabled
1-Enabled, the phone will automatically dial out the entered phone number on the pre-dialing screen
without pressing a send key.
Default
0
Web UI
Settings > Preference > Live Dialpad
Parameter
phone_setting.inter_digit_time <y0000000000xx>.cfg
Description
It configures the delay time (in seconds) for the phone to automatically dial out the entered phone
number without pressing a send key.
Note: It works only if “phone_setting.predial_autodial” is set to 1 (Enabled).
Permitted
Values
Integer from 1 to 14
Default
4
Web UI
Settings > Preference > Inter Digit Time (1~14s)
Auto Redial
You can set the phone automatically redial the last dialed number when the callee is temporarily unavailable. Both
the number of attempts and waiting time between redials are configurable.
Topic
Auto Redial Configuration
Auto Redial Configuration
The following table lists the parameters you can use to configure auto redial.

Table of Contents

Other manuals for Yealink SIP-T46S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T46S and is the answer not in the manual?

Yealink SIP-T46S Specifications

General IconGeneral
ManualYes
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Voice codecsCNG, G.711Mu, G.711a, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Lines quantity16 lines
Phonebook capacity1000 entries
Number of VoIP accounts16
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal4.3 \
Display resolution480 x 272 pixels
AC adapter input voltage100 - 240 V
AC adapter output current2 A
AC adapter output voltage5 V
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Volume controlDigital
Number of programmable keys10
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth213 mm
Width244 mm
Height185 mm
Package depth255 mm
Package width274 mm
Package height128 mm

Related product manuals