Yealink SIP-T46S Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
535
Viewing the Log Files
Local Logging Configuration
The following table lists the parameters you can use to configure local logging.
Parameter
static.local_log.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to record log locally.
Note: We recommend that you do not disable this feature.
Permitted
Values
0-Disabled, the phone will stop recording log to the log files locally. The log files recorded before are
still kept on the phone.
1-Enabled, the phone will continue to record log to the log files locally. You can upload the local log
files to the provisioning server or a specific server or export them to the local system.
Default
1
Web UI
Settings > Configuration > Enable Local Log
Parameter
syslog.usb.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to collect log using a USB flash drive.
Note: It works only if "static.local_log.enable" is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
All phones except T48G, T46G, T42G, T41P, T40P, T40G, T29G, T23P, T23G, T21(P) E2 and T19(P)
E2
Web UI
Settings > Configuration > USB Auto Exporting Syslog
Parameter
static.local_log.level <y0000000000xx>.cfg
Description
It configures the lowest level of local log information to be rendered to the <MAC>.log file.
When you choose a log level, it includes all events of an equal or higher severity level and excludes
events of a lower severity level. The logging level you choose determines the lowest severity of events
to log.
Permitted
Values
0-the system is unusable
1-action must be taken immediately
2-critical condition
3-error conditions
4-warning conditions
5-normal but significant condition
6-informational
Default
3
Web UI
Settings > Configuration > Local Log Level
Parameter
static.local_log.max_file_size <y0000000000xx>.cfg
Description
It configures the maximum size (in KB) of the log files can be stored on the IP phone.
When this size is about to be exceeded,

Yealink SIP-T46S Specifications

General

Manual	Yes
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Voice codecs	CNG, G.711Mu, G.711a, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Lines quantity	16 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
AC adapter output voltage	5 V
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Volume control	Digital
Number of programmable keys	10
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	SIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	213 mm
Width	244 mm
Height	185 mm
Package depth	255 mm
Package width	274 mm
Package height	128 mm