Yealink SIP-T46S Administrator's Guide

Troubleshooting Methods
536
(1) If the local log files are configured to be uploaded to the server by the parameter “static.auto_pro-
vision.local_log.backup.enable”, the phone will clear all the local log files on the phone once suc-
cessfully backing up.
(2) If “static.auto_provision.local_log.backup.enable” is set to 0 (Disabled), the phone will erase half of
the logs from the oldest log information on the phone.
Example:
static.local_log.max_file_size = 1024
Permitted
Values
T40P/T40G/T23P/T23G/T21(P) E2/T19(P) E2:
Integer from 256 to 1024
Other phones:
Integer from 256 to 2048
Default
T40P/T40G/T23P/T23G/T21(P) E2/T19(P) E2:
256
Other phones:
1024
Web UI
T40P/T40G/T23P/T23G/T21(P) E2/T19(P) E2:
Settings > Configuration > Max Log File Size (256-1024KB)
Other phones:
Settings > Configuration > Max Log File Size (256-2048KB)
Parameter
static.auto_provision.local_log.backup.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to upload the local log files to the provisioning server or a specific
server.
Note: The upload path is configured by the parameter “static.auto_provision.local_log.backup.path”.
Permitted
Values
0-Disabled
1-Enabled, the phone will upload the local log files to the provisioning server or the specific server to
back up these files when one of the following happens:
- Auto provisioning is triggered;
- The size of the local log files reaches the maximum configured by the parameter “static.local_
log.max_file_size”;
- It’s time to upload local log files according to the upload period configured by the parameter “stat-
ic.auto_provision.local_log.backup.upload_period”.
Default
0
Parameter
static.auto_provision.local_log.backup.upload_period <y0000000000xx>.cfg
Description
It configures the period (in seconds) of the local log files uploads to the provisioning server or a spe-
cific server.
Note: It works only if “static.auto_provision.local_log.backup.enable” is set to 1 (Enabled).
Permitted
Values
Integer from 30 to 86400
Default
30
Parameter
static.auto_provision.local_log.backup.path <y0000000000xx>.cfg
Description
It configures the upload path of the local log files.

Yealink SIP-T46S Specifications

General

Manual	Yes
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Voice codecs	CNG, G.711Mu, G.711a, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Lines quantity	16 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
AC adapter output voltage	5 V
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Volume control	Digital
Number of programmable keys	10
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	SIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	213 mm
Width	244 mm
Height	185 mm
Package depth	255 mm
Package width	274 mm
Package height	128 mm