EasyManuals Logo

Yealink SIP-T46S Administrator's Guide

Yealink SIP-T46S
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #182 background imageLoading...
Page #182 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
179
are using the phone handset or a headset.
Permitted
Values
Integer from 1 to 3
Default
2
Supported
Devices
T57W, T54W, T53W, T53, T48U, T46U, T43U, T42U
Smart Noise Filtering
The phones can block out the slight noise from the far party when there is no speech in a call, and at the same time
filter out the common transient noise (door closing, table knocking, and so on).
Topic
Smart Noise Filtering Configuration
Smart Noise Filtering Configuration
The following table lists the parameter you can use to configure smart noise filtering.
Parameter
features.noise_filtering_rev.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to block out the slight noise from the far end when there is no speech
in a call.
Note: After smart noise filtering is enabled, if the far end is playing music or calling a voice service, the
background music will also be eliminated when there is no speech in a call.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
T57W, T54W, T53W, T53, T48U, T46U, T43U, T42U, CP920
Web UI
Settings > Voice > Smart Noise Filtering > Smart Noise Filtering
DTMF
DTMF (Dual Tone Multi-frequency) tone, better known as touch tone. DTMF is the signal sent from the IP phone to
the network, which is generated when pressing the IP phone’s keypad during a call. Each key pressed on the IP
phone generates one sinusoidal tone of two frequencies. One is generated from a high-frequency group and the
other from a low-frequency group.
Topics
DTMF Keypad
Transmitting DTMF Digit
Suppress DTMF Display
Transfer via DTMF
Local DTMF Tone
DTMF Keypad
The DTMF keypad is laid out in a 4×4 matrix, with each row representing a low frequency, and each column rep-
resenting a high frequency. Pressing a digit key (such as '1') will generate a sinusoidal tone for each of two fre-
quencies (697 and 1209 hertz (Hz)).
DTMF Keypad Frequencies:

Table of Contents

Other manuals for Yealink SIP-T46S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T46S and is the answer not in the manual?

Yealink SIP-T46S Specifications

General IconGeneral
ManualYes
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Voice codecsCNG, G.711Mu, G.711a, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Lines quantity16 lines
Phonebook capacity1000 entries
Number of VoIP accounts16
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal4.3 \
Display resolution480 x 272 pixels
AC adapter input voltage100 - 240 V
AC adapter output current2 A
AC adapter output voltage5 V
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Volume controlDigital
Number of programmable keys10
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth213 mm
Width244 mm
Height185 mm
Package depth255 mm
Package width274 mm
Package height128 mm

Related product manuals